Specification
|
|
Manufactured in:
|
Australia by an Australian owned family company |
|
Standard Compliant:
|
|
AS1735 part 16 & BCA E3.6 Compliant |
|
|
Maintenance:
|
We recommend that the lift be serviced at no greater intervals than 12 months. This will keep the lift in a safe and serviceable condition. |
|
BCA E.3.6 Compliant:
|
Car size 1100mm x 1400mm, Braille & Tactile, lift car entrance sensors automatic dialling telephone and dual car controls |
|
Application:
|
Commercial |
|
Installation:
|
|
Internal or external |
Crane in or dismantle
The lift complete with it own tower can be fitted to an owner supplied shaft. No load bearing walls are required. Cladding is to be in compliance with the lift code. |
|
|
Drive system
|
Dual Oil Hydraulic Cylinders one each side of the lift car with chain over operation. 1:2 Ratio. |
|
Suppy Voltage
|
240 volt 16 amp |
|
Travels:
|
up to 6.8 metres 3 level |
|
Lift Speed:
|
Rated speed .150m per second |
|
Lifting Capacity:
|
350kg ( 2 people including 1 in a wheel chair) |
|
Lift Construction:
|
Built as a free standing self supporting unit, weighing approx 450kg the lift is fabricated from aluminium.
The tower comes complete with doors, door frames, flashing, electrical wiring and hydraulic cylinders. |
|
Pit Depth:
|
80mm |
|
Car Size:
|
|
1100mm wide x 1400mm deep & 2000mm high with a clear door opening of 900mm |
|
|
Car Configuration:
|
Single entry
Dual entry - through car |
|
Car Fitout:
|
|
For durabilty the lift car is lined in white colourbond and trimmed with extruded aluminium. Other options are available |
|
The car floor can either be fitted with grey indoor/outdoor carpet or left bare. |
|
|
Standard features include: |
|
* Dual control inside the lift car |
|
* Braille & Tactile |
|
* EM Phone |
|
* Stainless steel handrail |
|
* Two recessed down lights |
|
* Light curtain across the door entrance |
|
* Door hold open device |
|
|
Landing Doors:
|
|
Fitted with swing action doors the Mariner can be supplied with a variety of door styles: |
|
* Redi-cote |
|
* Corinthian - Impression |
|
* Metal |
|
* Glass |
|
All doors are fitted with mechanical electric interlock, an adjustable automatic door closer and full length handle. Glass view panels are provided in the Redicote and Metal doors. |
|
|
Automatic door operators are available as an optional extra |
|
|
Stations:
|
|
Mounted on a stainless steel plate with protruding buttons the electric controls are automatic in operation |
|
Key lockable at one or all landings to prevent unwanted users |
|
Illuminated indications |
|
Weatherproof stations are available for external landing stations |
|
|
Safety Features:
|
|
* Key lockable push button controls. |
|
* Back up battery power for lighting & lowering of the car |
|
* Emergency manual lowering facility provided in the machine cabinet |
|
* A non-reversal timer of 5 seconds is fitted to allow the rider in the car to open the landing door once the car has stopped without the threat of the car being called by another operator.
Optional feature - The hydraulic pump is controlled by a variable voltage variable frequent drive that provides a smooth acceleration giving unsurpassed passenger comfort in a hydraulic lift.
|
|
|
|
|
Machine Cabinet:
|
|
Fabricated from metal and painted the machine cabinet is suitable for external or internal installation. |
|
The cabinet is fitted with a key lockable door and contains the hydraulic |
|
power unit, hydraulic control valves, electrical control board, emergency power supply and cabinet light. The emergency tools and instructions are located within this cabinet. |
|
|
The cabinet size is 1800mm in height x 605mm in width x 335mm in depth |
|
|
Work by Others:
|
|
* Certification of the lift slab by an approved Engineer |
|
* Providing the relevant mounting slab for the lift - min 80mm setdown. |
|
* Providing penetration in the upper floor, if the lift is being craned in penetration in the |
|
ceiling will be required. |
|
* Enclosing the lift shaft once the lift is in place. |
|
* If the ceiling above the lift shaft is not covered over then barrier protection in the roof |
|
cavity will be required. |
|
* Supply of a 240V. 16A electrical circuit to the Machine Cabinet. |
|
* Supply and connection of a telephone line to the lift shaft terminating in the junction |
|
box provided by the lift installers (extension of the residence phone). |
|
* Painting the landing doors and the external walls around the lift |
|
|
Warranty:
|
12 months on all parts and labour excluding misuse and/or malicious damage. |
|
Operation:
|
Constant Pressure - Pressure must be maintained on the operation button for the duration of its travel and until the car comes to a complete stop. |
|
All changes must be in compliance with the lift code and the manufacturer reserves the right to approve or refuse any changes . |
