Product Navigator - /

Product Selector

Select your product requirement to search

Submit

The Mariner

Offering a budget solution in providing multi-level disabled access to a commercial premises. The Mariner 16 is ideal for schools, factories, churches, organizations, & government buildings.

Built to Australian Standard 1735 part 16, the Mariner 16 lift is BCA E3.6 compliant and is perfect for complying with the disable access regulations for commercial buildings, whether it be for a new or existing building.

Capable of servicing up to four levels with a maximum travel of up to 7.5 metres, the Mariner is powered by an advanced chain-over oil hydraulic drive system that requires no over head space or structural support.

Offering an alternative to the costly expense associated with providing load bearing walls, large slab footings and a machine room, the Mariner 16 comes complete with it’s own light-weight self supporting lift shaft, landing doors and machine cabinet.

Requiring only days to install, the Mariner 16 is custom built in Australia resulting in short lead times. Rated for 350kg, it can easily carry three people and has a clear car size of 1100mm x 1400mm x 2100mm between sensors.

 

Accessible
Residential

Manufactured By: Aussie Lifts
Manufactured in:Australia by an Australian owned and family operated company
Standard Compliant:Meets and exceeds requirements of the Australian Standards:
AS1735 part 16 & BCA E3.6 Compliant
Application:Commercial
Installation:
Internal or external
Crane in or dismantle
The lift complete with it own tower can be fitted to an owner supplied shaft or your choice of cladding attached directly to the tower.
No load bearing walls are required.

Cladding is to be in compliance with the lift code.
Drive systemIndirect acting Oil Hydraulic Cylinders one each side of the lift car with chain over operation. 1:2 Ratio.
Supply Voltage240 volt 16 amp
Travels:up to 7.5 metres 3 level
Lift Speed:0.185 m/sec with hydraulic valve stop with an up stop
Lifting Capacity:350kg
Lift Operation:Automatic. Lift will operate by one press of the button.
Lift Tower:Built as a free standing self supporting unit, weighing approx 650kg the lift is fabricated from aluminum. The tower comes complete with doors, door jambs, flashing, electrical wiring and hydraulic cylinders.
Pit Depth:100mm
Car Size:Single entry "A Model" 1100mm x 1450mm x 2100mm
Dual entry "B Model" 1100mm x 1515mm x 2100mm

Clear floor space between the sensors is 1100mm x 1400mm

Depending on the selected finish, the actual size of the car and shaft may have to be increased to ensure the required floor space stays compliant with the BCA code.
Car Configuration:Single entry "A Model" with entry and exiting on the same side
Dual entry "B Model" with entry at the front and exiting via the rear
Car Fitout:For durability the lift car is lined in white colorbond . Custom finishes such as Tasmanian oak, MDF, vinyl and stainless steel are also available .

Standard features include:

Dual control inside the lift car
Braille & Tactile
Automatic dialing emergency phone
Stainless steel handrail
Four recessed down lights
Light curtain across the door entrance
Door hold open device
Non-slip floor covering indoor/outdoor carpet

Optional extra full length stainless steel control panels
Landing Doors:Fitted with swing action doors the Mariner can be supplied with a variety of door styles:
Redicote flush door with optional glass view panel
Patterned door from the Corinthian or Hume internal range
Metal door with optional glass view panel
Glass door
To assist in the operation of the doors, a door old open device is fitted. Automatic door operators and swipe card security devices can be added to the landing doors as an optional extra.
Stations:Mounted on a stainless steel plate with stainless steel buttons the electric controls are automatic in operation
Key lockable at one or all landings to prevent unwanted users
Illuminated operation and safeties indicator
Weatherproof stations are available for external landing stations
Safety Features:Key lockable push button controls
Back up battery power for lighting & lowering of the car
Emergency manual lowering facility provided in the machine cabinet
A non-reversal timer of 5 seconds is fitted to allow the rider in the car enough time to open the landing door once the car has stopped without the threat of the car being called by another operator.
Optional feature - The hydraulic pump is controlled by a variable voltage variable frequency drive that provides a smooth acceleration giving unsurpassed passenger comfort in a hydraulic lift.
Machine Cabinet:Fabricated from metal and painted the machine cabinet is suitable for external or internal installation.
The cabinet is fitted with a key lockable door and contains the hydraulic
power unit, hydraulic control valves, electrical control board, emergency power supply and cabinet light. The emergency tools and instructions are located within this cabinet.

The cabinet size is 1800mm in height x 605mm in width x 335mm in depth
Electrical requirements:The Mariner 16 only requires a 16amp RCD protected single phase power circuit. The lift mains do not require fire rating so the lift can be fed from a local sub board.
Warranty:12 months on all parts and labour excluding misuse and/or malicious damage.
Maintenance:For optimum performance, reliability and long term use,the lift should be serviced every 12 months by an approved lift technician. .
All changes must be in compliance with the lift code and the manufacturer reserves the right to approve or refuse any changes.

Operation & Structure

  • Automatic in operation
  • Direct acting hydraulic cylinders (recycled oil) with electrical controls
  • Only an 100mm pit is required
  • Available in either single entry or dual thru car model
  • Services 2 levels with the option of 1 intermediate landing
  • Provided with 970mm wide swing action landing doors
  • Top of shaft 2350mm – No overhead space is required
  • Simple to use controls
  • Key lockable
  • Supplied with an external grade machine cabinet
  • Door hold open devices
  • Self Supporting
  • Dual car controls

Cost Effective

  • Every lift is stood, run and tested before being dispatched from Aussie Lifts Brisbane factory
  • Self supporting lift tower – no load bearing walls required
  • Only 100mm pit depth
  • No separate machine room construction required
  • Low installation/constructions cost
  • Low running cost/power consumption
  • Single phase 240v power
  • Suitable for internal or external installation
  • Once a year maintenance

Safety

  • Automatic battery backup lift car lowering system
  • Reliable dual oil hydraulic chain-over cylinders
  • Additional manual lowering facility
  • Emergency lift car lighting – in the event of power failure
  • Auto dialling emergency EM Phone
  • Emergency Stop and alarm button
  • Light curtain sensors across the lift car entrance
  • Reliable dual oil hydraulic
  • Automatic homing of the lift car
  • Non return breather

Peace of Mind

  • Manufactured by a family owned and operated company
  • Australian made to Australian Standards
  • Built to superior specifications using quality materials
  • Warranty on parts and labour
  • Parts readily available
  • Lift delivered, installed and tested by a qualified Lift Technician
  • Custom built to your specification
  • Lift shaft can be finished to match existing architecture
  • Unrivalled after-sales service
  • Easy to operate
  • Reliable