Full of surprises, the Phoenix offers versatility in size, speed and design for multi-level residential properties.
Custom-built in Australia as a free standing unit, the Phoenix has short lead times and eliminates many of the traditional costs associated with luxury lifts.
Capable of servicing up to four levels, with a maximum travel of 7.15 metres, the Phoenix is powered by an advanced chain-over oil hydraulic drive system that not only pushes the boundaries of residential performance but also dramatically reduces pit and overhead lift height requirement – especially important with height restriction.
Supplied as a complete free-standing unit with its own self-supporting tower, doors, hydraulics and pump, the Phoenix provides flexibility in speed, weight capacity, size and finishes.
Eliminating the huge expense of building a conventional lift tower, the Phoenix requires no load bearing walls and is easy to install.
With a lifting capacity of 350kg, the Phoenix can easily carry two people (including a wheelchair) at an average lift speed of 0.185 m/sec or 0.292 m/sec if the enhanced option is selected.
|Manufactured by:||Aussie Lifts Pty Ltd|
|Manufactured in:||In Australia at our Acacia Ridge Factory in Brisbane|
|Standard Compliant:||Meets & exceeds requirements of the Australian Standard AS1735 part 16 & 18.|
Suitable for internal or external installation.
|Installation:||Crane in or dismantle.
The lift comes complete with its own tower so it can be fitted to an owners supplied shaft or have sheeting attached directly to the tower (2 level).
Cladding is to be in compliance with the lift code.
|Drive system:||Two indirect acting oil hydraulic cylinders on both sides of the lift car.
|Supply Voltage:||240volt power circuit with 16amp circuit breaker.|
|Travels:||Lift travels up to 7.15 metres.|
|Lift Speed:||Standard - 0.185m per second under a 90kg load using a hydraulic valve block with an up stop.
Optional extra - Enhanced rated speed .225/m sec - for part 16 lifts
Optional Extra -Enhanced rated speed .292/m sec - for part 18 lifts
|Lift Operation:||Automatic. Lift will operate by one press of the button.|
|Lift Tower:||Built as a free standing, self supporting unit, weighing approx 650kg the lift is fabricated from aluminum. The tower comes complete with doors, door frames, flashing, electrical wiring and hydraulic cylinders.
No load bearing walls are required
|Car Size:||Standard Model - 900mm wide x 1300mm deep x 2100mm high.
Deluxe Model - 1100mm wide x 1400mm deep x 2100mm high.
|Car Configuration:||Single entry "A Model" with entry and exiting on the same side
Dual entry "B Model" with entry at the front and exiting via the rear
|Landing Doors:||Door size for standard lift car: 870mm wide x 2040mm high.
Door size or deluxe lift car: 920mm wide x 2040mm high.
2340mm high doors are also an available option.
|Stations:||Supplied with the option of two different style control panels, grey or stainless steel, the panel
consist of buttons for each levels, and an emergency stop.
|Machine Cabinet:||The Phoenix uses a separate lift machine cabinet that creates a more compact lift design and eliminates costly machine room construction.
The cabinet size is 1800mm in height x 605mm in width x 335mm in depth.
|Electrical Requirements:||The standard, enhanced and deluxe models all have the same economical power requirements:
240volt, single phase, 20amp RCD protected
Active analog telephone line
|Maintenance:||For optimum performance, reliability and long term use, the lift should be serviced every 12 months by an approved technician.|
|Warranty:||12 months on all parts and labour excluding misuse and/or malicious damage.|
|All changes must be in compliance with the lift code and manufacturer reserves the right to approve or refuse any changes.|
Operation & Structure
Peace of Mind