Product Selector

Select your product requirement to search


The Orion C350 Commercial Lift

The Orion C350 is the largest of all our lifts with a travel of up to 7.15 metres. Perfect for schools, factories, organisations & government buildings.

Built to Australian Standard 1735 part 16, the Orion C350 lift is BCA E3.6 compliant and is perfect for complying with the disable access regulations for commercial buildings, whether it be for a new or existing buildings.

Offering an alternative to the costly expense associated with providing load bearing walls, large slab footings and a machine room, the Orion C350 comes complete with it’s own light-weight self supporting lift shaft, sliding landing doors and machine cabinet.

Capable of servicing up to four levels with a maximum travel of 7.15 metres, the Orion C350 is powered by an advanced chain-over oil hydraulic drive system that requires no over head space or structural support.

Requiring only days to install, the Orion C350 lift is built in Australia, which results in very short lead times. Rated for 350kgs, the Orion C350 can easily carry three people and has a clear floor space of 1200mm x 1400mm x 2100mm.



Manufactured By: Aussie Lifts Pty Ltd
Manufactured:In Australia at our Acacia Ridge Factory in Brisbane
Standard Compliant:Meets and exceeds requirements of the Australian Standards:
AS1735 part 16 & BCA E3.6 & E3.3 Compliant
Installation:Internal or external
Crane in or dismantle
The lift complete with it own tower can be fitted to an owner supplied shaft or your choice of cladding attached directly to the tower.
No load bearing walls are required.

Cladding is to be in compliance with the lift code.
Drive systemIndirect acting Oil Hydraulic Cylinders one each side of the lift car with chain over operation. 1:2 Ratio.
Supply Voltage240 volt 20 amp
Travels:up to 7.15 metres
Lift Speed:0.185 m/sec with hydraulic valve stop with an up stop
Lifting Capacity:350kg
Lift Operation:Automatic. Lift will operate by one press of the button.
Lift Tower:Built as a free standing self supporting unit, weighing approx 950kg the lift is fabricated from aluminum. The tower comes complete with sliding doors, door jambs, flashing, electrical wiring and hydraulic cylinders.
Pit Depth:150mm
Car Size:Standard 1200mm wide x 1400mm deep x 2100mm high
Car Configuration:Single entry "A Model" with entry and exiting on the same side
Dual entry "B Model" with entry at the front and exiting via the rear
Landing Doors:Fitted with automatic sliding doors

Stations:Mounted on a stainless steel plate with stainless steel buttons the electric controls are automatic in operation
Key lockable at one or all landings to prevent unwanted users
Illuminated operation and safeties indicator
Weatherproof stations are available for external landing stations
Safety Features:Key lockable push button controls
Back up battery power for lighting & lowering of the car
Emergency manual lowering facility provided in the machine cabinet
A non-reversal timer of 5 seconds is fitted to allow the rider in the car enough time to open the landing door once the car has stopped without the threat of the car being called by another operator.
Optional feature - The hydraulic pump is controlled by a variable voltage variable frequency drive that provides a smooth acceleration giving unsurpassed passenger comfort in a hydraulic lift.
Machine Cabinet:The cabinet size is 1800mm in height x 605mm in width x 335mm in depth
Electrical requirements:The Orion C350 only requires a 20amp RCD protected single phase power circuit. The lift mains do not require fire rating so the lift can be fed from a local sub board.
Warranty:12 months on all parts and labour excluding misuse and/or malicious damage.
Maintenance:For optimum performance, reliability and long term use,the lift should be serviced every 12 months by an approved lift technician. .
All changes must be in compliance with the lift code and the manufacturer reserves the right to approve or refuse any changes.

Operation & Structure

  • Automatic in operation
  • Oil hydraulic chain over with indirect acting cylinders on each side of the lift car. 1:2 ratio
  • Only an 150mm pit is required
  • Available in either single entry or dual through car model
  • Services up to 4 levels
  • Provided with fully automatic sliding doors
  • Simple to use controls
  • Key lockable
  • Supplied with an external grade machine cabinet

Cost Effective

  • Every lift is stood, run and tested before being dispatched from Aussie Lifts  Brisbane factory
  • Complete free standing unit- no load bearing walls required
  • Low installation costs
  • Low running cost/power consumption
  • Single phase 240v power
  • Once a year maintenance


  • Automatic emergency battery backup lowering system
  • Additional manual lowering facility
  • Battery backup in-lift lighting system
  • Internal Phone
  • Emergency Stop and alarm button
  • Infra-red safety sensors across the lift car entrance
  • Key lockable push button controls
  • Hydraulic low pressure detection switch
  • Automatic homing of the lift car
  • Non return breather

Peace of Mind

  • Manufactured by a family owned and operated company
  • Australian made to Australian Standards
  • Built to superior specifications using quality materials
  • Warranty on parts and labour
  • Parts readily available
  • Lift delivered, installed and tested by a qualified Lift Technician
  • Custom built to meet the user’s needs
  • Unrivalled after-sales service
  • Environmentally friendly
  • Reliable